• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to leave and enter the house whenever it wants is an excellent method to keep your pet physically active and mentally stimulated. Having a flap can also aid in reducing accidents due to toilets by making it easier for your cat to exit the house when it needs to.

Take a look at the Door

A cat flap allows your pet to come and go whenever they want without having to open the door. This makes it ideal to keep them in the house when you're home or away and helps keep unwanted pests out of your home as well!

It's important to measure the door prior to when you buy a cat flap since there are various sizes available. This will ensure that you purchase the correct size that fits into your door made of upvc door panel with cat flap otherwise, it might be too small or too large, and your cat may have trouble using it.

Before you do anything but use a ruler to determine the width of the door in various places along its edge. Also, take measurements of the door's height in a couple of places. This is because the door that is too high can cause your cat to do the gymnast's routine each time they want to use the flap!

If you're not sure how to measure the door, it may be best to seek assistance from a glazier, or someone who does this type of work frequently. They can determine if your door is suitable for cat flaps and can advise you on what size flap you should purchase.

Draw the shape of the hole on the door once you have the measurements. This will provide you with a guide when it comes to cutting the hole out and will prevent you from making an error that will cost you money in the end!

Make sure you make the hole in the right place. For instance, if you're installing the cat flap inside a patio door, it's important that the hole is not too close to hinges, as this can cause leakage and problems with the seal.

If you have an opening made of glass, it might be best to delegate this task to a professional glazier. It isn't easy to install a cat-flap in an existing pane. You might also discover that it breaks and loses its weatherproof seal.

Measure the Cat

A cat flap lets your pet leave and come back door with cat flap fitted whenever they want, without having to leave him home alone. It also helps stop the draughts from entering your home, which isn't bad for you or your cat!

If you own a uPVC door or composite, it might be difficult to install the cat flap. These kinds of doors are usually constructed from different materials than traditional wooden or uPVC doors, and the installation process is different as well. Before you think about installing an egress flap to your uPVC or composite door, ensure that it is compatible and that you have consulted the manufacturer as any modifications could affect any warranties.

These doors are typically designed to be durable and tough and have insulation. This makes them more resistant to elements of the weather than other doors, however they can be a challenge to insert an animal flap. If you're not sure if your uPVC or composite door is able to accommodate a cat flap, consult with a professional joiner before starting.

You'll need to determine the height of your child to ensure they fit through the door. It's easiest to measure their height when they're calm or asleep, so that they don't move around. Once you've determined their height, take a measurement of the distance between their stomach and the floor to determine where the bottom of the cat flap should be. Then, you can mark this position on the door.

When you use power tools to cut your uPVC door or composite door, you need to be careful. Cutting into metal can cause cracks, particularly if the area is composed of toughened glass. It is highly recommended to employ an experienced glass installer to install a cat flap step flap in a pane. This will prevent the glass from becoming fragile or shattering. A Glazier is also in a position to provide you with a cat flap that is less likely to break and is safer for your cat to use.

Cut the Hole

A good cat flap should come with a template that can be used to mark the location on your door where the hole should go. If it doesn't, you can make one yourself using an uncoated sheet of paper (tracing paper is ideal). Once the shape has been pencilled in on the door, then use Fitting A Cat Flap In A Upvc Door spirit level to ensure that the shape is completely horizontal. This will allow your cat flap to sit properly in the opening and prevent it being in a position to slide open or closed.

Next, employ a jigsaw for cutting out the design that is on the door. Make sure that you're using a blade suitable for use on uPVC doors - usually it will be marked as such, if not ask the staff at your DIY store for advice. Once the hole is made then place the flap against it and open it to make sure the flap moves smoothly. If it is bound at any point, you can use a filer or rasp to remove it.

Also, make sure whether there are any electric cables or gas pipes within the door you'll be cutting through since they could be damaged by the Jigsaw. Additionally, you should be aware of any handles or other door fixtures which will need to be removed to fit the cat flap. You should be careful not to harm them during the process.

Most people who install a cat flap on their own will have a standard solid uPVC door and will not be dealing with any of these problems. But, if your door is made from timber or has an ornamental panel that can't be removed, this could make it more difficult to complete the task.

It is always advisable to seek professional assistance from a cat flap fitter for these kind of jobs because it is essential to do them right to avoid any possible issues in the future. Getting it wrong can cause the door to be damaged and may cause the warranty to be invalidated.

Fit the Flap

After you've made your hole drilled, put the flap on to test whether it opens easily. If you find any points that stick or catch, use a hand file or sandpaper, to file them down until they fit perfectly and open without difficulty. Make sure that the flap sits perfectly flush with the door.

If your kit doesn't include an example, you could use tracing paper that is thin, such as a piece of paper or Acetate. Place the paper on the door, and draw a line to indicate the location where the flap is placed (this will serve as your cutting guide). Then, using the pencil lines you've drawn on the door, draw four screw holes in each corner of the flap - these will be the screw points that you'll use to secure the flap into the right position.

Most uPVC doors are strong and therefore quite straightforward to cut into. However, if your door is made from GRP or a composite then this may be more difficult. If you're unfamiliar in this area, it might be advisable to hire a professional to do the job for you. They can also help you determine whether or not your door is suitable for installation of a cat flap.

If you are planning to install a cat flap into composite doors, it is essential to first consult with the manufacturer or a professional joiner. Any modifications made to the doors could cause the warranty to be void. If you decide to do the work yourself, bear in mind that it could be messy and could be dangerous.

When you have composite doors, you'll usually need to use the aid of a saw or grinder to cut through wall cat flap the door's frame instead of just cutting through the GRP. Be aware that this could be a very hazardous job and you'll need to take great care not to damage the door or yourself since it is very fragile. It's important to remember that cutting holes into any type of glass for a door is far more difficult than making the same changes in the case of a uPVC or solid wood door.