• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an auto locksmith or Subaru dealer, depending on the age of your Subaru is. This is accomplished by connecting a computer programming machine to your car.

To program your Subaru unlock the door on the driver's side by pressing the door button. Then close it. You will hear the chime and see the dome lights blink in the instrument panel.

Step 1: Find the circuit board for your transmitter

There are a variety of ways to program your key fob. First, you should determine what kind of key fob you have. This can be done by looking at the shape of your key fob or by listening to the car's chime.

Once you have the information you require, you can start the process of programming your key fob at home. To do this, you will require a key made of steel and a screwdriver with a flat head. You can open the key fob by twisting. Then push the key in and pull the battery from the tiny tabs that secure it. Replace the battery and put the case back together.

Step 2: Unscrew the Key Fob Case

The battery should be replaced. This is a good idea, as it can bring back key fobs that aren't working any more. However, there are cases where the buttons in the key fob may be damaged. If you notice that the metal contacts on the button have become loose You can try soldering them back in place to get them working again.

Make sure you turn off your ignition and close your doors prior to you begin. Close the door on the driver's side and then press your door button 10 times in rapid succession. Then you'll hear the instrument panel chime, and your dome light should flash. This means that you are ready to move forward.

Step 3: Put the Key Fob in the Ignition

Many online articles will teach you how to program your brand new or replacement Subaru keyfob at home. However, most of them don't provide very specific instructions. Reprogramming a key that is electronic is best handled by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your subaru chip key replacement with the engine off and all doors shut. Use the door button to unlock all doors. Close and open the driver's door twice more. Then insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp when the settings are altered.

Step 4 4. Turn on the ignition.

It is crucial to note that this method of programming a key fob is effective if you have a functioning key. If you don't, a dealership or auto-locksmith will have to program the key fob for your Subaru Fort Bliss.

After your key has been programmed and you are able to start your car in about five seconds. Start by closing the doors and then shutting off the engine. Then, sit in the driver's chair and unlock all doors using the door button control. Put the key in the ignition, turn it on to the off position (the electrical systems will turn on but the engine remains off) then turn it back to the off position ten times in rapid succession.

Step 5 Step 5: Unlock Driver's Door

Subaru offers a wide range of luxury cars with key fobs which lock and unlock doors, turn on the engine, and even defrost windows. These devices can stop working.

Contact a locksmith or a dealer to fix the problem. This will resolve the issue and ensure that your car is safe.

To do this, you must open the door to the driver's side and close it. Then, place the ignition key and move it to the first position. Then, it should be returned to the off position. Do this as fast as you can for ten times. After the tenth time, you should hear an audible chime.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

The process to replace the battery in the subaru find my keys remote key (ai-db.science) fob is replacing a subaru key breeze. Remove the fob's exterior case. Then, use an flathead screwdriver, to pry into the case's interior and remove the old battery.

After taking the battery out, replace it with the new one. Close the case. Next, sit in the driver's seat, and unlock all doors by using the door button control. Put the key in the ignition and turn it to ensure that the electrical system is switched on, but the engine is off. Repeat this 10 times in succession until you hear the chime from the instrument panel. This will put the system into programming mode.

Step 7: Press the Lock/Unlock Button on the Passenger's Door

The annoying chirp which can be heard when unlocking or locking the Subaru Key Fob from outside of the vehicle is distracting for certain owners. In certain situations you can turn off the chirp by opening and closing all doors by double-clicking on the lock button on your key fob.

Close all doors including the fuel-filler lid, and switch off the ignition. For 10 seconds pressing and holding the lock button on the key fob. Once this is completed, the instrument panel emits an audible chime. The chime signals that the door and fuel-filler lid are locked. It is possible to change the setting so that the doors lock automatically without pressing a button.

Step 8 Step 8: Enter the 8-digit Transmitter Number

Write down the first sequence of 8-digits and keep it handy. Now, climb into your driver's chair, close all of the doors, and then turn the key back to the first position (towards on). After 10 turns, your panel will chime once.

The transmitter circuit board is located inside the key fob's case. The circuit board will have one or two 8-digit numbers. Follow the directions in the guide to register the code. For older models, this process may require a visit to the dealer.