• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors get worn out over time and will need to be replaced. It is essential to be able to match the dimensions of the handles for internal bifold doors that were previously used when replacing them.

The top screw position, the lever and the keyhole dimensions are the three measurements you have to verify. Refer to the size guide for assistance in this.

Inline Lever/Lever

A lever handle is a modern-day patio door handle locks handle designed to work with new or replacement handles for windows doors. This style door handle is offered in a variety of styles and finishes. A number of manufacturers offer this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles of uPVC/Composite are made of sturdy materials and are perfect for multi point lock doors that require a heavy duty design. The handles are inline and use the same spindle and screws to secure them. They can be easily installed on any uPVC/Composite doors.

The spring lever design allows the handle to be placed and angled for comfortable operation and is suitable for all users. The handle has been tested for endurance up to 200,000 cycles, which will ensure the quality of the finish and performance of the handle over time. The lever that springs is adjustable to accommodate a wide range of locks. This is particularly useful for narrower door frames where the cylinder is located further back. A shorter lever is an ideal choice for doors where the latch can be operated by a thumb turn located on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently to the lever type handles found on most doors. The handle can use a single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are generally used on UPVC double glazed doors and come in a variety of styles and finishes.

The handles have been tested to at least 200 000 cycles and are available in various finishes including White, Silver, Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle the best performance and durability for the purpose it was designed for.

All UPVC handle lever pads include a spindle and screws, and can be fitted on the uPVC door. The 211mm backplate fixing centres allow for a wider size of handle which can often be a benefit when replacing a faulty or worn multi-point door lock mechanism. These handle levers are also spring-loaded, thereby solving the issue of handles hanging out of their horizontal position when they are not in use.

It is essential to ensure that the PZ dimensions for both the multipoint lock as well as the uPVC doors when choosing the replacement UPVC spindle and window handle replacement. This measurement is also known as the handle centre or 'cylinder centres and is an essential aspect of matching up the correct handles.

After you have identified the correct size of PZ it is important to make sure that the push and lever pads are designed to fit the American with Disabilities Act compliant handles you require for your door. They are typically round or square, with an internal lever and an external push pad.

The majority of UPVC Lever Pads we offer are sprung. This means they can be reverted to a horizontal position after not in use, rather than hanging and possibly being stuck in the frame. This keeps draughts out of the building. It is also the case that the majority of UPVC lever pad handles are hand-operated that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are typically found on uPVC doors, but can also be used on other types of door. They work by using a key to unlock a cylinder case that will reveal pins that can be aligned with the pins in the lock body and permitting them to turn the cam, thereby opening the door. Euro cylinders can be fitted with up to six pins with both internal and external doors usually having different levels of security.

The choice of the correct cylinder is vitally important; this is contingent on the way your doors and handle are utilized. Doors that are external, for instance should be equipped with cylinders that are more secure, whereas doors inside can be secured using an ordinary cylinder. Certain cylinders come with extra features that can improve security, such as anti-drill or anti bump properties.

To ensure that the euro cylinder is the right size for your door, it must be measured correctly. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn in the event that one is present. If you are unable measure it using the lock in its position, you can remove it. A cylinder that extends beyond the handle and escutcheon may be vulnerable to attacks such as lock snapping, so it is crucial that it's not too long.

The majority of modern cylinders have been designed with anti-drill and bump resistance features included in their design. These are designed to reduce the chances of an attack by forcing the cylinder to rotate in an opposite direction. This helps prevent attacks and keep your doors safe.

Certain cylinders are constructed to resist snapping. This is an increasingly common kind of attack on cylinders which is where the break line of the lock is smashed by a tool that is specially designed to snap off the front of the cylinder to allow the victorian scroll door handles to open. This is a much faster and more convenient method of gaining access than a multipoint locking system. It also leaves no evidence of the break-in which can hinder insurance claims.

Spring Cassette

This spring cassette is found within the base plate of the door handle. It is a spring-loaded solution to help return your multipoint lock handles back to their normal position after usage. There was a time when handles of this kind did not have a spring integrated into them, and without it they are more likely to slide or drop when the locking mechanism has been disengaged. This component is the best solution to fix this problem. It also helps prevent your door from becoming stuck in either the open or closed position, as they are difficult to close manually.

These spring cassettes are specifically designed to be used with multipoint locks sprung but they won't work with multipoint handles that are not sprung and you will need to have a custom hole cut into your backplate in order for them to fit (please look at the image for a technical diagram). They are a replacement for broken or missing cassettes within the backplate of the door handle for numerous kinds of uPVC doors. They are fitted with an elongated square that allows for an 8mm spindle to be used and are available in a variety of.

These spring cassettes are an excellent value for money solution to the issue of door handles that are sagging. These spring cassettes are simple to install and will extend the lifespan of your uPVC door. For more information on our selection of uPVC accessories and spares, please feel free to get in contact with our team. We are on hand to help and happy to offer expert advice.