• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Reasons Your fiat keys 500 Key Fob Won't Work

A key fob from fiat panda remote key replacement 500 makes it easy to open doors and start your vehicle. However, there are many reasons why the fob won't be functioning. It could be due to a dead battery water damage, receiver module issues, and interference.

This listing is for a NEW replacement fiat panda key Flip Key Remote that looks like the Ilco brand. It has to be professionally programmed (click here to search for local locksmiths for your vehicle). Includes lock, unlock, and trunk buttons.

Dead Coin Battery

A dead battery is the most frequent cause of your 500 key fob not working. Key fobs of today have only a limited range of operation and must be within a few inches of the vehicle to function. If you're not close to your vehicle and you press the key fob button, the car won't be able to respond, and will display an "Key Fob Not Detected" message in the instrument cluster.

If this happens then replace the battery for your coin-cell (Part Number CR2032) with a new battery of a trusted brand such as Panasonic Duracell or Energizer. They are usually available at your local hardware store, or online.

After you've changed the battery on the coin cell You can test it by standing next to your fiat abarth key 500 and pressing the buttons. The car should blink its parking lights and the key fob should operate the lock and unlock buttons.

If your key fob still isn't working even after replacing the battery, there could be water damage that is preventing it from communicating with the module inside your vehicle. Water damage can occur in many ways, including simply splashing or submerging the key fob in saltwater at the beach. If you suspect that your fob has been exposed to water, you can try placing it in a dry rice bag to draw the moisture out. If this fails, you'll require your fob to be changed by an auto locksmith or dealer.

Water Damage

Water damage can occur when you immerse the fob into the ocean or wash it in a machine. Saltwater can be particularly harmful to the fob's circuit board that can cause it to short out and eventually end up dying. The fob getting wet is not a good idea but if you accidentally drop it into a glass of water or fail to remove it from your pocket before you run the washer Don't give up hope.

Take the battery off first. Clean the electronic chip using isopropyl ethanol or a similar product and then dry it completely before replacing the battery. Test the fob afterward to determine if it's working. If the key does not function it could need to be changed. This is usually done by a professional or dealer auto locksmith.

If the key is a newer model and hasn't been programmed to your vehicle It will most likely need to be replaced completely. A professional automotive locksmith can carry out this simple task. The locksmith will need to cut the key to match the ignition of your car. The locksmith will also have to reprogram your fob into the car's system. This is a simple and cost-effective procedure that can be completed the same day.

Receiver Module Issues

One of the main reasons why your 500 key fob might stop functioning how much is a new fiat 500 key because it's out of range. The remote's range is of 30 feet. So should you be too far away from your vehicle it won't respond to your commands. You can easily remedy this by moving your remote closer to your vehicle until it responds.

If you've replaced the battery on your coin (commonly known as a "button" or "watch") and your fob doesn't function It could be because of an internal circuit board issue. In the majority of cases, reprogramming your fob will resolve this problem. You can find the procedure for the majority of vehicles on YouTube or in the owner's guide.

It may be necessary to replace the metal clips that hold the coin batteries in the correct position. If they loose tension, it could hinder the coin battery from being seated properly, and this will result in the malfunction of your remote.

In rare instances the fob might become desync'd with your vehicle due to software problems or hardware issues. This could be a huge trouble, but you could often fix this by visiting an auto locksmith to reprogram your fob. In some instances, they may need to reinstall the software in your body control module, as well.

Interference

Interference can also cause the key fob to be unable to receive or transmit an signal. This may happen if the keyfob is in close proximity to a radio transmitter, such as a cell phone or radar detector. The key fob may not work because of a weak connection with the buttons water damage or damage to the internal chips.

If the key fob been unable to function for a while out of the blue, or after trying every option at home to fix it e.g. replacing batteries, reprogramming or using the spare key fob, it could have a damaged receiver module on your 500. The receiver module, located under the dashboard, detects radio frequency signals from your key fob. It converts them to electronic commands that the vehicle interprets.

There is a simple way to reset the 500's on-board system including the keyfob. Disconnect the battery of 12 volts for approximately 15 minutes by removing the negative cable and then the positive cable. Then reconnect the battery. This will eliminate any residual electricity and restart the car's computers, which could allow you to the key fob to function again. If the issue persists, you should consult an expert technician. They will be able to identify the root cause of any issues.