• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Fix a Loose Door Hinge

Repairing a broken door hinge can be a doable job for most homeowners. But, if the screw holes are stripped and won't hold screws you might have to add dowels and wood glue before you can reinstall the hinge.

Before you do that though scrub away any surface rust. This will help keep the dowels in place and give them a solid base to hold onto.

Remove the Hinges

A variety of door hinges can be removed, making it easier to move doors from one side of the frame to the other side or take the entire door off if necessary. Anyone who is patient can take the hinges off, but you need to know what to do.

If the hinges have been painted it is necessary to remove it before you attempt to remove the pins. You could scratch your door if you don't take off the paint. Put the hinges in an stainless steel pot and fill it up with water until the hinges are submerged. Allow the hinges to sit in the pan for about 30 minutes. The heat from the water will soften the paint making it easier to remove.

After the pins have been loosen, you can remove the hinges from the frame and door. It is possible to use a regular screwdriver, but you should use a magnetic screwdriver for this job. This type of screwdriver has been specifically designed to take out metal screws and will aid you in getting the job completed much quicker.

Before you attempt to remove the double glazed hinges, it is a good idea to spray them with a oil. A simple lubricant can make the process move along quickly and aid in the removal of the screws and pins. You can find this kind of lubricant at a variety of hardware and home improvement stores.

The number of hinges required will also depend on the type of door you have and how it's installed. Doors with a heavier core and solid-core will require more hinges, while hollow-core doors with a lighter weight might only require two or three hinges.

It is also important to be aware of the various kinds of hinges so you can determine which ones will best suit your needs. Exterior hinges are designed to hold the weight of a door, while interior hinges must be able to handle heavier loads.

Reattaching the Hinges

Sometimes, a hinge on a door will become looser over time and begin to hang out types of upvc door hinges alignment or sag. It can be a big problem, but the fix is usually simple. Retightening the screw will typically solve the issue. If the screw holes have been ripped out, it could be a challenge to complete. However, there is a trick to get the holes back in place using a wooden dowel.

Begin by drilling the hole with a drill bit close to the size of the new screw (normally 3/8"). Then, use wood glue and dowels made of wood to fill the hole. The dowel should be cut to a length that is the same as the screw to ensure a tight fit. After that, reinstall the screw and tighten it until the desired level of tightness. If the door does not stop bind up, add another dowel to the gap. Repeat the process. Close the door slowly after each adjustment to make sure that the clearances around the perimeter are correct.

Another option is to utilize the wood plug instead of a dowel. It works equally well, but may take a bit longer to install. You can tap in a piece of wood that has been whittled down to the proper size. If you don't have an instrument for woodworking, you can use toothpicks or matchsticks made from wood.

After you've reinstalled your new screw then use a countersink to make the hole for the screw's head smaller so that it won't touch the edge of the door when it's opened and closed. This will make it much easier to tighten the screws after replacing hinges.

After installing the hinge again, you should apply lubrication to the hinge using an oil-based lubricant that is dry. This will help to prevent it from becoming stuck in the future. You can use products like PB Blaster and Liquid Wrench. Apply a thin layer of it and allow it to penetrate the hinge barrel for about 15 minutes.

Refinishing the Hinges

If you are not ready to replace the hinges on your door, you could make a few minor repairs. The first step is to ensure that the screws holding the hinge plate to the door frame are tight. If they're loose, tighten them with the help of a screwdriver or a power drill. Be careful not to over tighten the screws as this could cause gaps to appear at the trim joints or more seriously, tear out the threads.

If the problem is that the hinge plates are breaking away from the jamb and door and jamb, you can fix them by gluing wood glue to the plate's back and then inserting wooden dowels or toothpicks into the holes. The toothpicks or dowels will serve as a solid base for the screws and help keep the plates from moving when you drive them into the holes. Allow the glue to dry before reattaching your hinge.

Another reason that causes hinges that are loose is that the screws are damaged or gone. This issue can be resolved by replacing the screws. Use a drill that is similar to the size of the screw hole to prevent drilling into the hinge or jamb.

After you've reattached your hinge shut the door and examine the gap between the frame and the door. It should be approximately the thickness of one nickel all the way around or less if there's a gap created by a door that hung improperly. If the hinges were installed correctly, this should not be an issue.

If the hinges are still loose, you can add a thicker hinge between the surface of the hinge plate and the mounting surface. This will allow the hinges more space. You can also remove the hinge pin, then pound it down with a hammer to tighten it or use the hinge of a different type. You can also lubricate your hinges with mineral oil or jojoba to decrease friction and keep them in their place. Lubricating your hinges regularly will help stop them from becoming stiff and squeaky, and also prolong their lifespan.

Cleaning the Hinges

The continuous movement of hinges for upvc doors creates friction, which draws dust particles. These particles may get stuck and accumulate in the moving parts of door hinges if they're not maintained and cleaned regularly. The hinge will become stiff and creaky, and its appearance could rapidly diminish. Regular cleaning, lubrication and inspections will ensure the quality and function of Casement windows hinges that are attached to doors.

Examine the hinges for signs of the accumulation of rust. If the rust has become so severe that it has damaged the surface of the screw holes or the barrel of the hinge, you'll need to replace the hinges. If you are able to save the hinges, first brush away loose rust using steel wool and wire brushes. Apply a commercial rust-removing solution or homemade solutions like lemon juice to the hinge. Let the solution that removes rust be on the hinges for a few minutes to penetrate and dissolve any remaining rust.

If you don't wish to spend cost and time to replace hinges, simply tightening the screws will make the hinges functional again. It is possible to attach a wooden shim or dowel to the hinge in the event that the screws have been stripped. Dowels made of wood are round pieces of wood that are in the form of rods that are available in various sizes and lengths. You can purchase them online, in woodworking supply shops and home improvement centers.

You can also make an shim out of metal or plastic depending on the kind of hinge you are using. To make a dowel, cut a wooden dowel to the desired length. You can then dip the dowel in a carpenter's glue and insert it into the hole that you have stripped and let the glue hold the dowel in place.

Before cleaning the hinges, lay down a piece of paper cloth or towel to shield your flooring from spills. After you have protected the area then clean the repair window hinges using an easy sponge or cloth coated with mild cleaner to get rid of dirt and grime. Also, tarnish and rust can be removed. A small brush or toothbrush can be used to access difficult-to-reach places in crevices and difficult places.