• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It can be difficult to install a cat flap, but with the right guidelines, it's not all that difficult. Find out how high you'd like your cat flap to be (normally it's located at belly height). Then, mark this area on your door and then use the template included as a guide when drilling.

If you have a kitten who is still a newborn then gently prop the door slightly open and allow it to walk through. Reward it when it goes through.

Take a measurement of the door

A cat flap is an excellent method to let your pet move in and out of your home whenever it wants. This can help keep your cat in good health as it will ensure it gets enough exercise and will also allow it to go back inside when it is stranded in the elements during bad weather. It also can reduce the amount of time you'll have to allow it out or in and can protect your home by letting you know when it has gone out.

It is crucial to make sure that the cat flap is set up properly to stop your pet from being forced through through it by other animals (e.g. dogs). It is essential to measure the height of your pet's belly as well as the doorway to your home to ensure that the flap is at the right height. You can adjust the height of your flap in case your cat is taller or less than average.

The next step is to use a spirit level to mark the centre of the door, where you will put the flap. Then, using the mark as an indication, cut out the contour of the flap on the door with the aid of a jigsaw. Once you have cut out the door, sand the edges of the door to create smooth surfaces and drill any fixing holes required.

Fitting a cat flap should not take more than two hours. The process can be slightly more difficult if you have to install it in the form of a uPVC door or composite one. This is due to the fact that these doors are available in a variety of thicknesses, which can affect the way the holes are cut. We always recommend to consult with an expert for your first experience with glass.

Measure Your Cat

You can save yourself hours of listening to the pet meow to be let in or out. This is particularly useful if you are at work most of the day and your cat is stuck in the house waiting for you to get home in any weather.

It is crucial to first measure your cat before attempting to install. It might seem like a simple task, but it's crucial to get the measurements right. In the event that you don't, your cat may have difficulty putting it in use.

First, ensure that your cat is calm before you begin taking measurements. You'll need to put your cat flap installers in a position where they cannot move. Also, ensure that the measuring tape is flat and not curved against the body. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat's body, it's time to look at the door and decide on where you want to place the flap. Place the flap at the level of your cat's belly. This will allow them to pass through the door with minimal effort. This will also avoid the flap making lots of noise when it swings open and closed.

You should consider the thickness of the replacement upvc door panel with cat flap or composite door as well. While timber doors are of a similar thickness, uPVC and composite doors are different in their overall structure and can make fitting a cat flap install flap more complicated because you must ensure that the hole you make is the proper size for your pet.

You can make use of the template included in the instructions to mark the position of the opening on the door. This will help you determine where the hole needs to be located and ensure that the template is placed properly on the door. It is also a good idea to employ a spirit-level to ensure that the template is in a straight line against the door.

Cut the Flap

Before you can put in your cat flap, you'll must cut the door panel to make a space big enough to accommodate it. This is a difficult task and it is recommended that you seek the help of a professional cat flap fitting service for this step in case you don't have the knowledge or skills to do it yourself. It is also recommended to read the instructions included with the kit to learn how to do this correctly.

To do this you need to measure the height of your cat or kitten's belly and use this as an indicator point. A good guideline is to set the flap around 10-15 centimeters off the ground, as this is the typical belly height for cats. This way your cat will be able to go through wall cat flap the flap without difficulty and also give any other cats or curious neighbours a tough time trying to enter or leave.

Draw the location of the cat flap on the door using pencil. If your kit includes a template you can place it on the door. Use the markings on the template to drill holes at each corner. You will then be able to cut the shape of the template and replace it with your cat flap.

You can install your cat flap yourself inside the door made of wood or uPVC if you are confident using a jigsaw. Be sure not to cut through the mullions or rails that run vertically of your door. You can use a Jigsaw to cut your panel into a square or circle, depending on how you'd like to cut it. Take your time and don't try to try to force the jigsaw to cut faster.

After the hole has been cut then carefully insert the cat flap into its new home and ensure that it is firmly secured. If the flap is fitted with screw caps, push them onto the protruding bolts. After the screws are installed smooth the edges and seal any gaps. This will block drafts from entering your home.

Place the Flap

If you have an ordinary cat flap, you can try to encourage your pet through it by placing a small amount cat food on the top of the door. You can also push the cat with a stick or your hand. Once your cat is comfortable moving through the flap, it will be capable of walking through the flap whenever it wants. This will allow you to let it in and out as it's wanted.

You can fit an animal flap inside the upvc door panel replacement cat flap or glass doors however it's not as simple as fitting one into a wood external door because the UPVC doors and some glass doors don't have a consistent thickness. This could have a significant impact on the way you cut the flap's hole and whether the flap will fit correctly after installation.

Based on the type of cat flap you select, it may include a mounting kit as well as a template that will tell exactly where to drill holes for it. If the kit does not include the template, you can photocopy it to create your own. It's important not to press the jigsaw too hard when cutting, so that it doesn't make a larger than necessary hole in your door.

Certain cat flaps come in circular shapes, which can be more difficult to install. If you have a circular flap, it's important to make sure the hole is in the proper location on your door as if it's not, your cat will not be able to use the flap and could be stranded in the open all day (or even night).

Some models of cat flap have locks which allow you to manage the time your cat comes and goes. These are very helpful if you're concerned about your cat going out at night and coming back in the darkness, or you're at work all day. The lock can be engaged to allow or deny entry, and some locks can be locked in both directions, which allows you to close the door completely, which is particularly beneficial for sick or elderly cats who aren't keen on going out in the rain.